DTC P0602: PCM Programming Error (ECM/PCM)
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems, or How to Troubleshoot the CVT System .
- This DTC is indicated when a PCM update is not completed.
- Do not turn the ignition switch to ACC (I) or LOCK (0) while updating the PCM. If you do, the PCM can be damaged.
- Problem verification (update):
- 1. Do the PCM update procedure - Refer to: PCM Update, or PCM Removal and Installation (Without Keyless Access System), or PCM Removal and Installation (With Keyless Access System) .
- 2. Check for Pending or Confirmed DTCs with the HDS.
Is DTC P0602 indicated?
YES
Replace the original PCM - Refer to: PCM Update, or PCM Removal and Installation (Without Keyless Access System), or PCM Removal and Installation (With Keyless Access System) .
NO
Update is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.