LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Civic Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Engine Mechanical - Testing & Troubleshooting (Hybrid) >> Testing >> Valve Stem-to-Guide Clearance Inspection >> Inspection

Valve Stem-to-Guide Clearance Inspection: Inspection

  1. Valve Stem To Guide Clearance Inspection 

    1. Subtract the O.D. of the valve stem, measured with a micrometer, from the I.D. of the valve guide measured with an inside micrometer or a ball gauge. Take the measurements in three places along the valve stem and three places inside the valve guide. The difference between the largest guide measurement and the smallest stem measurement should not exceed the service limit.

    Intake Valve Stem-to-Guide Clearance
    Standard (New): 0.020-0.050 mm (0.00079-0.00197 in)
    Service Limit: 0.08 mm (0.0031 in)
    Exhaust Valve Stem-to-Guide Clearance
    Standard (New): 0.050-0.080 mm (0.00197-0.00315 in)
    Service Limit: 0.11 mm (0.0043 in)
    GHH118061Courtesy of HONDA, U.S.A., INC.