LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> Ridgeline RT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Block >> Crankshaft Main Bearing Replacement >> Main Bearing Selection >> Block Bore Code Location

Block Bore Code Location

Letters or bars have been stamped on the end of the engine block as a code for the size of each of the four main journal bores.

Use them, and the numbers stamped on the crankshaft (codes for main journal size), to choose the correct bearings. If the codes are indecipherable because of an accumulation of dirt and dust, do not scrub them with a wire brush or scraper. Clean them only with solvent or detergent.

Fig 1: Identifying Crankshaft Bore Code Location
G05964161Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Crankshaft Bore Code Specification Chart
G05964162Courtesy of AMERICAN HONDA MOTOR CO., INC.

Main Journal Code Locations (Numbers or Bars) 

Fig 3: Identifying Main Journal Code Locations
G05964163Courtesy of AMERICAN HONDA MOTOR CO., INC.