LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Ridgeline V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Locks >> Trunk / Liftgate Lock Cylinder >> Testing and Inspection

Trunk / Liftgate Lock Cylinder: Testing and Inspection




In-Bed Trunk Lid Key Cylinder Switch Test

RTS, RTL, and EXL models

1. Remove the in-bed trunk lid inner cover. In-Bed Trunk Lid Latch Replacement

2. Disconnect the 2P connector from the key cylinder switch.

3. Check for continuity between the terminals.
There should be continuity between terminals No. 1 and No. 2 when the in-bed trunk lid key cylinder switch is in UNLOCK position. There should be no continuity between terminals No. 1 and No. 2 when the in-bed trunk lid key cylinder switch is in the released (neutral) position.

4. If the continuity is not as specified, replace the in-bed trunk lid key cylinder switch.