DTC 1306: Vehicle Speed Pulse
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Before you troubleshoot, make sure to follow the GENERAL TROUBLESHOOTING INFORMATION .
- Clear the hard ERROR CODE .
- Turn the ignition switch to LOCK (0), and then start the engine.
- Check for the hard ERROR CODE
.
Is DTC 1306 indicated?
YES -Go to step 4.
NO -Intermittent failure, the system is OK at this time. ■
- Drive the vehicle and watch the VSP signal.
Does the VSP signal change from [0] to [1] as you drive?
YES -Replace the AUDIO-NAVIGATION UNIT . ■
NO -Do the VEHICLE POSITION ICON CONSTANTLY LEAVES ROAD, MOVES ERRATICALLY OR IS VERY FAR FROM ACTUAL POSITION . ■