LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Element SC, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Assembly) >> Rear Engine Mount Removal and Installation >> Removal

Rear Engine Mount Removal and Installation: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the rear engine mount stop nuts (A).
    Fig 1: Identifying Rear Engine Mount Stop Nuts
    G06966414Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Raise the vehicle on the lift.
  3. Support the engine/transmission with a transmission jack.
  4. Disconnect the rear engine mount actuator connector (A), then remove the heat shield (B) and the rear engine mount stop (C).
    Fig 2: Identifying Rear Engine Mount Actuator Connector, Heat Shield And Rear Engine Mount Stop
    G06966415Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the rear engine mount bracket (A) and the rear engine mount (B).
    Fig 3: Identifying Rear Engine Mount Bracket And Rear Engine Mount
    G06966416Courtesy of AMERICAN HONDA MOTOR CO., INC.