LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2005 >> Odyssey V6-3.5L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> System Specifications >> Tightening Torques and Sequences >> Main Bearing Cap

Main Bearing Cap

Main Bearing Cap






Install the bearings (A) and bearing caps (B) with the arrow (C) facing the timing belt end of the engine.





Tighten the bearing cap bolts, and then the bearing cap side bolts to the specified torque in the sequence as shown. Repeat the torque sequence again to verify the bolts are properly torqued.