LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Element DX, 2.4 YH1, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator Removal and Installation >> Removal

Alternator Removal and Installation: Removal

  1. Make sure you have the anti-theft code for the radio, then write down customer's audio presets.
  2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
  3. Remove the drive belt (see DRIVE BELT INSPECTION ).
  4. Remove the auto-tensioner (see DRIVE BELT AUTO-TENSIONER REPLACEMENT ).
  5. Disconnect the alternator connector (A), BLK wire (B), and harness clamp (C) from the alternator.
    Fig 1: Disconnecting BLK Wire And Harness Clamp From Alternator
    G03677032Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Remove the positive crankcase ventilation (PCV) valve (see PCV VALVE REPLACEMENT ).
  7. Remove the three bolts securing the alternator.
    Fig 2: Removing Bolts From Alternator
    G03677033Courtesy of AMERICAN HONDA MOTOR CO., INC.