LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Element DX, 2.4 YH1, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Openers >> Hatch Handle Replacement

Hatch Handle Replacement

Special Tools Required 

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:
  • Put on gloves to protect your hands.
  • Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  1. Remove the hatch trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREA ).
  2. Pry the hatch handle covers (A) out from both sides using the appropriate tool from the KTC trim tool set, then remove them from the hatch handle (B).
    Fig 1: Removing Hatch Handle
    G03679557Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the nuts, then remove the hatch handle (A) from the hatch (B).
    Fig 2: Removing Hatch Handle From Hatch And Torque Specifications
    G03679558Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the hatch opener cable (A) from the handle (B). Take care not to kink the cable.
    Fig 3: Disconnecting Hatch Opener Cable
    G03679559Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the hatch handle in the reverse order of removal, and note these items:
    • Make sure the hatch opener cable is connected securely.
    • Make sure the hatch opens properly.