LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Element DX, 2.4 YH1, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio System >> Audio Unit Removal/Installation

Audio Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS before performing repairs or service.

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the dashboard and related parts.
  1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
  2. Remove the dashboard center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  3. Remove the four mounting bolts, then remove the audio unit.
  4. Disconnect the audio connectors (A) and antenna lead (B).

    EX and '06 EX-P models: 

    Fig 1: Disconnecting Audio Connectors And Antenna Lead (EX And '06 EX-P Models)
    G03679911Courtesy of AMERICAN HONDA MOTOR CO., INC.

    DX model (Canada), LX model (USA): 

    Fig 2: Disconnecting Audio Connectors And Antenna Lead [DX Model (Canada), LX Model (USA)]
    G03679912Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the eight mounting bolts securing the audio unit to the audio unit bracket.
  6. Install the audio unit in the reverse order of removal, and note these items:
    • Make sure the audio unit connector is plugged in properly, and the antenna lead is connected properly.
    • Enter the anti-theft code for the radio, then enter the audio presets.