LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Interior Trim) >> Dashboard >> Center Panel Removal/Installation

Center Panel Removal/Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to scratch the dashboard and related parts.
  1. Remove the steering column covers (see step 4 on STEERING COLUMN REMOVAL AND INSTALLATION ).
  2. Carefully detach the clips, then remove the center panel (A). Disconnect the heater control panel connectors (B) or climate control unit connectors, rear A/C control dial (C) (for some models) and interior light switch connector (D). With navigation system, disconnect the hazard warning switch connector, rear A/C control dial, and interior light switch connector. For '03-04 models: Disconnect the passenger's airbag off indicator connector.
    Fig 1: Removing Center Panel
    G01512653Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the panel in the reverse order of removal, and note these items:
    • Make sure each connector is plugged in properly.
    • Push the clips into place securely.