LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1995 >> Prelude SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 2.3L >> Engine Sensors & Switches >> TDC/CKP/CYP Sensor

TDC/CKP/CYP Sensor

  1. Turn ignition off. Unplug TDC/CKP/CYP sensor connector, located at distributor. Check resistance between terminals "B" and "F", terminals "C" and "G" and terminals "D" and "H". See Fig 1 . If resistance is 350-700 ohms for each pair, go to next step. If any of resistance is not as specified, replace distributor.
  2. Check for continuity between each distributor terminal and chassis ground. If continuity exists at any terminal, replace distributor.
    Fig 1: TDC/CKP/CYP Sensor Connector Terminal ID
    G90A17145Courtesy of AMERICAN HONDA MOTOR CO., INC.