Automatic Down (Driver's Window)
With the ignition switch is in RUN or START, voltage is applied tot he coil of the power window relay. The contacts of the power window relay close and voltage is applied to the driver's power window master switch and the power window control unit. When u push the driver's switch to the AUTO DOWN position, voltage is applied through the driver's power window switch to the power window control unit's down and auto down hold inputs. The voltage triggers the power window control unit and voltage is applied from the power input through the motor down control output to the power window motor. The power window control unit receives voltage pulses at the pulser input while the motor is operating. When the window is fully down, the motor stops and pulses are no longer generated by the pulser. This is sensed by the power window control unit at the pulser input and voltage is no longer applied to the power window motor.