LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1990 >> Prelude Si, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Shift Lever Position Switch Testing

Shift Lever Position Switch Testing

Remove front console. Disconnect console switch 10-pin connector. Check continuity between terminals No. 1 and No. 2. See Fig 1 . Continuity should be present between terminals No. 1 and No. 2 when shift lever is in "2", "S", "S", "S4" and "D" positions. There should be no continuity when shift lever is in "N", "R" and "P" positions. If continuity is not as specified, replace switch.

Fig 1: Testing Shift Lever Position Switch
G91E02789Courtesy of AMERICAN HONDA MOTOR CO., INC.