Fuel Pump: Installation
To install fuel pump, reverse removal procedure. Ensure pump bracket seal is properly aligned. Tighten fuel line banjo bolt to 20 ft. lbs. (28 N.m). Have an assistant turn ignition switch to "ON" position while watching fuel pump connections for leaks. Repeat check 2 or 3 times to ensure there are no fuel leaks.
To install fuel pump, reverse removal procedure. Tighten fuel tank drain bolt to 36 ft. lbs. (50 N.m). Tighten fuel line banjo bolt to 20 ft. lbs. (28 N.m). Have an assistant turn ignition switch to "ON" position while watching fuel pump connections for leaks. Repeat check 2 or 3 times to ensure there are no fuel leaks.