LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1988 >> Civic Base, 2D Hatchback >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Integrated Control Unit >> Accord

Integrated Control Unit: Accord

Remove front console and integrated control unit. Disconnect 16-pin connector at control unit. Perform input tests at harness pins. If all tests indicate no problem is present, replace control unit. See Fig 1 through Fig 5 .

Fig 1: Accord Oil Pressure Warning Light Flasher Circuit Test & Terminal Identification
G102987Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Accord Seat Belt/Key "ON" Beeper/Timer Circuit Test
G102988Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 3: Accord Ignition Switch Light Timer Circuit
G102989Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 4: Accord Side Marker Relay Circuit
G102990Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 5: Accord Light "ON" Warning Circuit
G102991Courtesy of AMERICAN HONDA MOTOR CO., INC.