Fuel Sending Unit
Remove access cover in luggage compartment area. Ensure ignition is off. Disconnect sending unit connector. Sending unit may have a 2-pin or 3-pin connector. Using Wrench (07920-SB20000 for Civic or 07GAC-SE0020A for all other models), remove fuel gauge sending unit. Measure resistance between sending unit terminals on 2-pin connectors, or terminals "A" and "B" on 3-pin connectors, while moving float to empty, half-empty and full positions. See Fig 1 . See FUEL GAUGE SENDING UNIT RESISTANCE table.
FUEL GAUGE SENDING UNIT RESISTANCE
| Float Position | Ohms |
|---|---|
| Full | 2-5 |
| 1/2 | 25.5-39.5 |
| Empty | 105-110 |