LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1989 >> Tracker Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> On-Vehicle Tests >> No Load Test (PRIZM)

No Load Test (PRIZM)

  1. Connect battery/alternator tester according to manufacturer's instructions. Check amperage and voltage with engine running at 2000 RPM. Alternator output should be less than 10 amps.
  2. Voltage should be approximately 13.5-15.1 volts. If voltage reading is above specified range, replace IC regulator. If voltage reading is less than specified, ground "F" (full field) terminal. See Fig 1.
  3. If voltage now climbs above specified range, replace IC regulator. If reading remains below specified range, repair or replace alternator.
Fig 1: Nippondenso Alternator Full Field Output Test
G29563Courtesy of GENERAL MOTORS CORP.