LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1989 >> Prizm Base, Automatic >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Assembly >> Inspection

Clutch Assembly: Inspection

  1. Check wear on facings of clutch disc by measuring depth of each rivet head. Minimum depth at any rivet is .012" (.30 mm). Maximum runout of clutch disc facing is .031" (.79 mm). Replace clutch disc if not within specification.
  2. Check diaphragm spring and pressure plate for wear or damage. If the assembly is excessively worn or damaged, replace pressure plate. Check pilot bearing rotation. If roughness is felt, replace bearing. Inspect flywheel runout.
  3. Maximum runout is .004" (.1 mm). If runout is excessive, replace flywheel. Clean flywheel and pressure plate of all oil, grease, and metal deposits. Inspect for damage, cracks or warpage. Slight surface scoring can be removed with sandpaper. Replace or repair as necessary.
CLUTCH DISC SERVICE LIMITS

Application In. (mm)
Prizm .012 (.30)