LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2025 >> GV70 3.5T Sport Advanced >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 2.5L) >> RCV Control Solenoid Valve >> Removal And Installation

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the RCV control solenoid valve connector (A), RCV hoses (B).
  4. After installing bolt, remove the RCV control solenoid valve.

    Tightening torque: 

    9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)

    G16847060Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.