LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2025 >> GV70 3.5T Sport Advanced >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel Delivery System - 2.5L) >> Fuel Pump Control Module (FPCM) >> Removal And Installation

Removal And Installation

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [RH].

    (Refer to Body (Interior and Exterior) - "LUGGAGE SIDE TRIM ")

  3. Disconnect the fuel pump control module connector (A).
    G16847153Courtesy of HYUNDAI MOTOR AMERICA
  4. After loosening the mounting nuts (A), then remove the fuel pump control module (B).

    Tightening torque: 

    3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

    G16847154Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.