LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Control System (SBW) - 3.3L >> Transmission Control Module (TCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Backup oil-pressure characteristics of old TCM in the GDS.
    G12715898Courtesy of HYUNDAI MOTOR AMERICA
    G12715899Courtesy of HYUNDAI MOTOR AMERICA
    G12715900Courtesy of HYUNDAI MOTOR AMERICA
    G12715901Courtesy of HYUNDAI MOTOR AMERICA
  2. Turn ignition switch OFF.
  3. Disconnect the negative (-) battery cable.
  4. Remove the cover (A) after removing the clips.
    G12715902Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the ECM connector (A) and TCM connector (B).
    G12715903Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the TCM & ECM after removing the bolts (A) and nut (B).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

    G12715904Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the TCM (B) after removing the nuts (A).
    G12715905Courtesy of HYUNDAI MOTOR AMERICA