LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Cooling System - 5.0L) >> Radiator >> Repair Procedures >> Inspection >> Radiator Cap Testing

Radiator Cap Testing

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
    G12720055
  2. Apply a pressure of 93.16-122.58 kPa (0.95-1.25kg/cm2 , 13.51-17.78 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.