LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System - 5.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to INTAKE AND EXHAUST SYSTEM - 5.0L Engine Mechanical System - )

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    G12720371Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts (A), and then remove the ETC module (B) from the engine.
    G12720372Courtesy of HYUNDAI MOTOR AMERICA