LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.3L >> Sub Fuel Sender >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the sub fuel sender.
  3. Using an ohmmeter, measure the resistance between terminals 1 and 2 of sender connector (A) at each float level.
    G12715752Courtesy of HYUNDAI MOTOR AMERICA
    Pin No Description
    1 Fuel sender signal
    2 Fuel sender ground
  4. Check that the resistance is within the specification.
    Position Resistance (Ω) Capacity (l  )
    1/2 160 - 162 3.5
    H 7 - 9 43.5