LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Knock Sensor (KS) >> Repair Procedures >> Removal >> [Knock Sensor #1 (Bank 1)]

[Knock Sensor #1 (Bank 1)]

  1. Remove the LH engine mounting support bracket.

    (Refer to Engine Mechanical System - "ENGINE MOUNTING ")

  2. Disconnect the knock sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
    G12715649Courtesy of HYUNDAI MOTOR AMERICA