LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> Engine Mechanical >> Intake And Exhaust System - 3.3L >> Intercooler >> Repair Procedures >> Remove And Installation

Remove And Installation

  1. Disconnect the battery (-) terminal from the trunk room.
  2. Disconnect the boost pressure sensor (A), PCV connector (B), vacuum hose (C) and then remove the intercooler outlet hose (D).
    G12715357Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the intercooler inlet hose (A).
    G12715358Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the front bumper.

    (Refer to Body - "FRONT BUMPER ")

  5. Remove the intercooler upper mounting bracket (A), lower bracket (B) and then remove the intercooler assembly (C).

    Tightening torque: 

    10.7 - 11.7 N.m (1.1 - 1.2 kgf.m, 7.9 - 8.6 Ib-ft)

    G12715359Courtesy of HYUNDAI MOTOR AMERICA
  6. Install in the reverse order of removal.