LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2025 >> Sierra 2500 HD Denali Ultimate >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement - Left Side >> Installation Procedure

Installation Procedure

  1. GM5312834Courtesy of GENERAL MOTORS COMPANY

    Apply a light coat of wheel speed anti-corrosion grease to the front wheel speed sensor and mounting pad on the front steering knuckle. Adhesives, Fluids, Lubricants, and Sealers 

  2. Front Wheel Speed Sensor (1) - Install
  3. GM5299212Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Wiring Harness Retainer (4) - Install

  4. Connect the front disc brake pad wear sensor electrical connector (3).
  5. NOTE:

    If vehicle was equipped with a retainer bracket, the updated wheel speed sensor retainer will utilize the retainer bracket bolt hole for installation.

  6. Wheel Speed Sensor Wiring Harness Retainer (2) - Install [3x]
  7. Front Wheel Speed Sensor Bolt (1) - Install and tighten - Fastener Specifications 
  8. GM5299213Courtesy of GENERAL MOTORS COMPANY

    Front Wheel Speed Sensor Bolt (3) @ Bracket - Install and tighten [2x] - Fastener Specifications 

  9. Wheel Speed Sensor Wiring Harness Retainer (2) - Install [2x]
  10. Connect the front wheel speed sensor and front disc brake pad wear sensor electrical connectors (1).
  11. Remove the support and lower the vehicle.
  12. Verify the repair is complete. Diagnostic Repair Verification