Removal Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Silverado 3500 HD and 2024 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. SIR Disabling and Enabling
Pull the body side rear window garnish molding (1) rearwards to release the tether from the body side inner frame.
- Access the quarter window trim finish panel bolt (2) which is located on the backside of the rear window garnish molding (1) and secures the tether to the body side inner frame.
- Quarter Window Trim Finish Panel Bolt (2) - Remove
- Body Side Rear Window Garnish Molding- Right Side (1) - Reposition
Disconnect the electrical connector.
- Release the retaining tabs.
- Remote Function Actuator Module (1) - Remove