LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Sierra 2500 HD Denali Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance Systems) >> Repair Instructions >> Side Obstacle Detection Control Module Replacement (ULV) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2024 Chevrolet Silverado 3500 HD and 2024 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Lifting and Jacking the Vehicle
  2. GM6122244Courtesy of GENERAL MOTORS COMPANY

    Rear Bumper Fascia Bolt (1) - Remove [3x]

  3. Disconnect the electrical connector.
  4. NOTE:

    Side Obstacle Detection Control Module will be attached to the cover

  5. Rear Bumper Fascia Molding Opening Cover (2) - Remove
  6. GM6122245Courtesy of GENERAL MOTORS COMPANY

    Rear Bumper Fascia Bolt (1) - Remove

  7. Side Obstacle Detection Control Module (2) - Remove