LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Sierra 2500 HD Denali Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance Systems) >> Repair Instructions >> Side Obstacle Detection Control Module Replacement (- ULV) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2024 Chevrolet Silverado 3500 HD and 2024 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5035039Courtesy of GENERAL MOTORS COMPANY

    Side Object Sensing Alert Module (2) - Install

  2. CAUTION:

    Refer to Fastener Caution .

  3. Side Object Sensing Alert Module Bolt (1) - Install and tighten - Fastener Specifications 
  4. GM5026575Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  5. Rear Bumper Impact Bar Bracket - Side Object Sensing Alert Module (2) - Install
  6. Rear Bumper Impact Bar Bracket Bolt - Side Object Sensing Alert Module (1) - Install and tighten [2x] - Fastener Specifications
  7. Lower the vehicle.
  8. Perform the necessary programming and setup procedure: Control Module References