LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Sierra 2500 HD Denali Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance Systems) >> Repair Instructions >> Side Object Sensing Alert Module Bracket Replacement (ULV) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2024 Chevrolet Silverado 3500 HD and 2024 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM6274231Courtesy of GENERAL MOTORS COMPANY

    Ensure the retaining tabs are properly aligned.

  2. Side Object Sensing Alert Module Bracket (2) - Install
  3. CAUTION:

    Refer to Fastener Caution .

  4. Rear Bumper Fascia Bolt (1) - Install and tighten - Fastener Specifications 
  5. GM6122244Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  6. Rear Bumper Fascia Molding Opening Cover (2) Install
  7. Rear Bumper Fascia Bolt (1) - Install and tighten [3x] - Fastener Specifications 
  8. Lower the vehicle.
  9. Perform the necessary programming and setup procedure: Control Module References