LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Sierra 2500 HD Denali Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Shift Lock Control System) >> Diagnostic Information and Procedures >> Transmission Control Lever Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2024 Chevrolet Silverado 3500 HD and 2024 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON / Vehicle in Service Mode.
  2. Verify the scan tool Brake Pedal Applied parameter changes between Active and Inactive while pressing and releasing the brake pedal.
    • Go to next step: If the parameter changes 
  3. Verify the S3 Transmission Shift Lever moves out of the PARK position when the brake pedal is applied.
    • If the S3 Transmission Shift Lever does not move out of the PARK position 

      Refer to Circuit/System Testing.

    • Go to next step: If the S3 Transmission Shift Lever does move out of the PARK position 
  4. A fault is not currently present and may be an intermittent condition.