LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Diagnostic Information and Procedures >> DTC C10E8 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify that DTC B1A4C or DTC U052A are not set.
    • Go to next step: If the DTC is not set 
  3. NOTE:

    The steering wheel heater will not operate when the steering wheel temperature is above 32°C (89.6°F)

  4. Verify the scan tool Heated Steering Wheel Switch parameter changes between Active and Inactive when cycling the heater steering wheel switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing

    • Go to next step: If the parameter changes 
  5. A fault is currently not present and may be an intermittent condition.