Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Apply a light coat of wheel speed sensor anti-corrosion grease to the wheel speed sensor and mounting pad on the wheel hub and bearing assembly. Adhesives, Fluids, Lubricants, and Sealers
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Wheel Speed Sensor Bolt (1) - Install and tighten to 13 N.m (115 lb in)
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Harness Clip (1) - Secure
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Harness Clip (1) - Secure
Wheel Speed Sensor Harness Clip (2) - Secure
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Harness Clip (1) - Secure
Wheel Speed Sensor Harness Clip (2) - Secure
Wheel Speed Sensor Electrical Connector - Connect
Front Brake Rotor Replacement (JD9, JB1)Front Brake Rotor Replacement (J95) - Install
Perform the vehicle diagnostic system check. Diagnostic System Check - Vehicle