LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Terrain SLE, 4D Utility >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Gear Inlet Pipe/Hose Replacement

Power Steering Gear Inlet Pipe/Hose Replacement

Fig 1: Power Steering Gear Inlet Pipe/Hose
GM2247256Courtesy of GENERAL MOTORS COMPANY
Power Steering Gear Inlet Pipe/Hose Replacement

Callout Component Name

Preliminary Procedures

  1. Place drain pans under the vehicle.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove as much power steering fluid from the upper power steering fluid reservoir as possible.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Power Steering Gear Inlet Hose
Procedure 
After the power steering gear inlet hose fittings are started, tighten both fittings to the specification given.
CAUTION:

Refer to Fastener Caution .


Tighten 
34 N.m (25 lb ft)
2 Power Steering Gear Inlet Hose O-ring Seal (Qty: 2)

Procedure

  1. Install NEW power steering gear inlet hose O-ring seals.
  2. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
  3. Clean any excess power steering fluid from the vehicle.