LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Terrain SLE, 4D Utility >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Cooling Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Place drain pans under the vehicle.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove as much power steering fluid from the upper power steering fluid reservoir as possible.
  4. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Terrain) , Front Bumper Fascia Replacement (Equinox) .
  5. Fig 1: Power Steering Fluid Cooling Pipe And Power Steering Gear
    GM2255189Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the power steering fluid cooling pipe (1) from the power steering gear (2).
  7. Fig 2: Power Steering Fluid Cooling Pipe And Lower Power Steering Fluid Reservoir
    GM2255240Courtesy of GENERAL MOTORS COMPANY
  8. Disconnect the power steering fluid cooling pipe (1) from the lower power steering fluid reservoir (2).
  9. Remove the power steering fluid cooling pipe bolt (5) from the bracket (4).
  10. Disconnect the power steering fluid cooling pipe clip (3) from the bracket.
  11. Fig 3: Power Steering Fluid Cooling Pipe Nut
    GM2255377Courtesy of GENERAL MOTORS COMPANY
  12. Remove the power steering fluid cooling pipe nut (2) and disconnect the bracket from the stud.
  13. Fig 4: Power Steering Fluid Cooling Pipe Components
    GM2256930Courtesy of GENERAL MOTORS COMPANY
  14. Remove the 2 power steering fluid cooling pipe bolts (1) from the front bumper impact bar.
  15. Disconnect the 3 power steering fluid cooling pipe clips (2).
  16. Remove the power steering fluid cooling pipe (3) from the vehicle.