LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Sierra 1500, 4D Pickup Extra Cab, 4.3 X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.3L - Repair Instructions >> Repair Instructions >> Spark Plug Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Spark Plug Wire Separators & Boots
    GM1876924Courtesy of GENERAL MOTORS CORP.
  1. Remove the appropriate spark plug wire boot(s) (2) from the spark plug.
    1. Twist the spark plug boot 1/2 turn.
    2. Pull ONLY on the spark plug boot or use a tool designed for this purpose in order to remove the spark plug wire boot from the spark plug.
  2. Fig 2: View Of Spark Plugs
    GM1876950Courtesy of GENERAL MOTORS CORP.
  3. Loosen the spark plug 1 or 2 turns.
  4. Brush or air blast away any dirt from around the spark plug.
  5. Remove the spark plug. If removing more than 1 plug, place each plug in a tray marked with the corresponding cylinder number.