LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Sierra 1500, 4D Pickup Extra Cab, 4.3 X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.3L - Repair Instructions >> Repair Instructions >> Knock Sensor 2 Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Oil Pan Skid Plate & Bolts
    GM1698082Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. If equipped, remove the oil pan skid plate and bolts.
  3. Fig 2: View Of Engine Wiring Harness & Components
    GM1877018Courtesy of GENERAL MOTORS CORP.
  4. Reposition the knock sensor sleeve (3) down, away from the knock sensor.
  5. Disconnect the engine wiring harness electrical connector (1) from the knock sensor.
  6. Fig 3: View Of Knock Sensor & Bolt
    GM1877020Courtesy of GENERAL MOTORS CORP.
  7. Remove the knock sensor bolt and sensor.