LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Sierra 1500, 4D Pickup Extra Cab, 4.3 X >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 4.3L - Repair Instructions >> Repair Instructions >> Fuel Line Replacement - Engine >> Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Feed Pipe
    GM1876017Courtesy of GENERAL MOTORS CORP.
    NOTE: Clean all the fuel pipe connections and surrounding areas before disconnecting the pipe in order to avoid possible fuel system contamination.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (CH-48027) or Fuel Pressure Relief (Without CH-48027) .
  2. Disconnect the chassis fuel feed pipe (1) from the engine compartment feed pipe. Refer to Metal Collar Quick Connect Fitting Service .
  3. Cap the fuel pipes in order to prevent possible fuel system contamination.
  4. Fig 2: View Of Fuel Pipe Retainer Nuts & Fuel Pipe Bracket Bolt
    GM1876542Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel pipe retainer nuts (1).
  6. Remove the fuel pipe bracket bolt (2).
  7. Fig 3: View Of Fuel Pipe Retainer
    GM1876545Courtesy of GENERAL MOTORS CORP.
  8. Remove the fuel pipe retainer.
  9. Pull straight up on the pipe in order to remove the pipe from the fuel meter body.
  10. Fig 4: View Of Spacer Ring, Fuel Seal Retainer, Upper & Lower Fuel Seals
    GM1876547Courtesy of GENERAL MOTORS CORP.
  11. Remove and discard the following components from the fuel meter body:
    • Fuel seal retainer (1)
    • Upper fuel seal (2)
    • Spacer ring (3)
    • Lower fuel seal (4)