LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Sierra Classic 3500 2WD V8-6.6L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair

Camshaft Position Sensor: Service and Repair



CAMSHAFT POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the cooling fan pulley.
2. Remove the camshaft position (CMP) sensor bolt.
3. Remove the CMP sensor.

INSTALLATION PROCEDURE




1. Lubricate the CMP sensor O-ring with clean engine oil.
2. Install the CMP sensor.

NOTE: Refer to Fastener Notice.

3. Install the CMP sensor bolt.

Tighten the bolt to 10 N.m (89 lb in).

4. Install the cooling fan pulley.