Shift Cable (Floor Shift): Installation
- Install the cable through the opening in the floor panel. See Figure.
- Install the grommet to the floor panel.
- Install the sound deadening material that covers the cable.
- Install the cable to the controller. See Figure.
- Install the retainer securing the cable to the controller.
- Connect the cable end to the controller ball stud.
- Install the front mat and carpet.
- Install the console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article.
- Ensure that the shift controller is in the Neutral position.
- Raise the vehicle.
- Install the range selector cable to the bracket.
- Install the retainer (1) to the range selector cable and transmission bracket. See Figure.
- Ensure that the transmission range selector lever is in the Neutral position.
- Following the adjustment procedure, install the range selector cable (2) to the range selector cable lever ball stud (1). See Figure.
- Install the positive assurance pin to the bracket.
- Install the transfer case shield, if equipped.
- Lower the vehicle and check for proper operation. Repeat the adjustment procedure if necessary. See SHIFT CABLE .