Filler Tube: Removal
- On 2.2L models, remove the bolt securing the dipstick to the exhaust manifold. See Fig 1.
- On all models, remove the transmission oil level indicator.
- Raise and support the vehicle.
- If the vehicle is equipped with a 2.2L engine, proceed to step 7.
- If the vehicle is equipped with a 4.3L engine, remove the exhaust manifold pipe.
- Remove the rear drive shaft. See appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVELINE/AXLES.
- Support the transmission and transfer case (if equipped) with a suitable jack.
- Remove the transmission support. See Fig 2.
- Lower the transmission to gain access to the bolt securing the filler tube to the transmission torque converter housing, and remove bolt.
- Remove the filler tube and seal from the vehicle. See Fig 3.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.