LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 4D Utility, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Lubrication >> Oil Cooler Flushing & Flow Check >> Forward Flush

Forward Flush

  1. Disconnect both hoses from the oil cooler pipes and then connect them to the opposite oil cooler pipe. This will allow the oil cooler and pipes to be flushed in the normal flow direction. See Figure.
  2. Repeat steps  6 and  7 of the BACK FLUSH procedure.
  3. Release the trigger (8) of the flusher and allow water only to rinse the oil cooler and pipes for one minute. See Figure.
  4. Turn the flusher water supply valve (1) to the OFF position and turn OFF the water supply at the faucet.
  5. Attach the shop air supply to the flushing system feed air valve (2) on the flusher, and blow out the water from the oil cooler and pipes. Continue until no water comes out of the discharge hose (5).