LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Jimmy 4D Utility, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Park/Neutral Position Switch >> Removal

Park/Neutral Position Switch: Removal

  1. Apply the parking brake. Shift the transmission into Neutral. Raise and support the vehicle. Remove nut securing transmission control lever to manual shaft. Remove transmission control lever from manual shaft. Disconnect electrical connectors from switch.
  2. Remove bolts securing PNP switch to transmission. Remove PNP switch from manual shaft. See Figure . If PNP switch did not slide off manual shaft, file outer edge of manual shaft to remove any burrs.