LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1988 >> Suburban 3/4 Ton 4WD V8-454 7.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Vehicle Speed Sensor >> Testing and Inspection >> Component Tests and General Diagnostics >> Test C: Programmer Clip Test >> Sample Calculation

Sample Calculation

The following information is an EXAMPLE ONLY of the Programming Clip Test procedure.

1. The distance is measured from the center of either rear wheel to the ground and found to be 15 inches, so R=15.

2. The axle ratio is found to be 2.73, so A=2.73.

Pulse Per Mile Calculation (Example):




3. The number of pulses per mile is calculated (see illustration).

Divide Ratio Calculation (Example):




4. The divide ratio is calculated (see illustration).

5. In Table 1, 0.573529 is not present. The next largest number on the table is 0.578125. The correct code is therefore 0001110, so the pins at terminals 4, 3, and 2 must be removed.