Ignition Timing
- Install timing light with an adapter between No. 1 spark plug and No. 1 spark plug wire, or use an inductive type pick-up. Do not puncture wire.
- Check or adjust ignition timing with engine at normal operating temperature, distributor vacuum advance line disconnected and plugged, and transmission in Neutral (automatic transmission in Drive). On 1978-79 Heavy Duty vehicles, place all transmissions in Neutral.
1975 IGNITION TIMING SPECIFICATIONS (DEGREES BTDC)
| Application | Man. Trans. | Auto. Trans. |
|---|---|---|
| 250" | 10 | 10 |
| 292" | 8 | 8 |
1976 IGNITION TIMING SPECIFICATIONS (DEGREES BTDC)
| Application | Man. Trans. | Auto. Trans. | ||
|---|---|---|---|---|
| 250" | ||||
| Light Duty | ||||
| Federal | 10 | 10 | ||
| Calif. | 6 | 10 | ||
| Heavy Duty | 6 | 6 | ||
| 292" | 8 | 8 | ||
1977 IGNITION TIMING SPECIFICATIONS (DEGREES BTDC)
| Application | Man. Trans. | Auto. Trans. | ||
|---|---|---|---|---|
| 250" | ||||
| Light Duty | ||||
| Federal | 6 | 10 | ||
| Calif. | 8 | 12 | ||
| High Alt. | 8 | ..... | ||
| Heavy Duty | 6 | 6 | ||
| 292" | 8 | 8 | ||
1978 IGNITION TIMING SPECIFICATIONS (DEGREES BTDC)
| Application | Man. Trans. | Auto. Trans. | ||
|---|---|---|---|---|
| 250" | ||||
| Light Duty | ||||
| Federal | 8 | 8 | ||
| Calif. | 8 | 10 | ||
| High Alt. | 8 | 12 | ||
| Heavy Duty | 6 | 6 | ||
| 292" | 8 | 8 | ||
1979 IGNITION TIMING SPECIFICATIONS (DEGREES BTDC)
| Application | Man. Trans. | Auto. Trans. | ||
|---|---|---|---|---|
| 250" | ||||
| Federal | 10 | 10 | ||
| Calif. | ||||
| C20, G20 & G30 | 6 | 8 | ||
| All Others | 10 | 10 | ||
| 292" | 8 | 8 | ||