LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2008 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Removal >> Exhaust Camshaft Position Sensor

Exhaust Camshaft Position Sensor







EXHAUST CAMSHAFT POSITION SENSOR

1. Remove the engine cover.
2. Remove the air cleaner and throttle body hose.
3. Disconnect negative battery cable.
4. If necessary, position the power steering fluid reservoir aside.




5. Disconnect exhaust camshaft position sensor harness connector (1).
6. Remove the exhaust camshaft position sensor mounting bolt (3).




7. Remove the exhaust camshaft position sensor (5).