LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> Edge Titanium >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> Floor Console >> Removal

Floor Console: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Release the clips and remove the RH floor console finish panel. Use the General Equipment: Interior Trim Remover
    GFD811377Courtesy of FORD MOTOR COMPANY
  2. Release the clips, push pin and remove the LH floor console side trim panel. Use the General Equipment: Interior Trim Remover
    GFD811378Courtesy of FORD MOTOR COMPANY
  3. Open floor console armrest.
    GFD811379Courtesy of FORD MOTOR COMPANY
  4. Release the clips, push pin and remove the RH floor console side trim panel.

    • Disconnect the electrical connector.

    GFD811380Courtesy of FORD MOTOR COMPANY
  5. Release the clips, push pin and remove the LH floor console side trim panel.
    GFD811381Courtesy of FORD MOTOR COMPANY
  6. Release the clips and remove the floor console upper trim panel.

    • Disconnect the electrical connectors.

    GFD811382Courtesy of FORD MOTOR COMPANY
  7. Release the clips and remove the finish panels.
    GFD811383Courtesy of FORD MOTOR COMPANY
  8. Remove the bolts and the transmission selector bracket and media bin.

    • Disconnect the electrical connectors.

    GFD815399Courtesy of FORD MOTOR COMPANY
  9. Release the clips and remove the trim panels.
    GFD815400Courtesy of FORD MOTOR COMPANY
  10. Disconnect the electrical connector and release the harness retainer.
    GFD815401Courtesy of FORD MOTOR COMPANY
    1. Remove the bolts.

      Torque

      : 2.5 Nm

    2. Remove the bolts.

      Torque

      : 6.2 Nm

GFD815402Courtesy of FORD MOTOR COMPANY