LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> Diagnosis And Testing >> Engine >> Pinpoint Tests >> Pinpoint Test B: Loss Of Coolant

Pinpoint Test B: Loss Of Coolant

  1. Possible Sources 

    • Seal
    • Coolant hose
    • Engine oil cooler
    • Coolant pump
    • Radiator
    • Heater core
    • Engine front cover
    • EGR cooler
    • Head gasket
    • Cylinder head
    • Cylinder block

    Visual Inspection and Pre-checks 

    • Check for engine coolant leaks around sealed areas, such as the coolant pump, intake manifold and cylinder heads.
    • Check the coolant hoses and tubes for damage.
    • Check the coolant hose and tube connections and make sure they are securely connected.

    NOTE: A sweet odor accompanying white smoke is not considered normal and is indicative of coolant in the exhaust.
  2. B1 CHECK FOR OBVIOUS SIGNS OF CONCERN

    • Ignition OFF.

    • Inspect the engine and cooling system for signs of coolant leaking externally. REFER to the Diagnosis and Testing procedure in the Engine Cooling System article for the engine being diagnosed. Refer to the appropriate Engine article for the procedure.

    Are any external coolant leaks detected? 

    Yes  REPAIR as necessary.
    No  GO to  B2
  3. B2 CHECK FOR EXCESSIVE SMOKE FROM THE EXHAUST

    • Start the engine.

    • NOTE: Coolant intrusion in to the cylinders will cause white smoke from the exhaust.

      Allow the engine to reach normal operating temperature. Inspect the exhaust for excessive white smoke.

    Does the exhaust emit excessive white smoke? 

    Yes  GO to  B6
    No  GO to  B3
  4. B3 CHECK FOR COOLANT IN THE ENGINE OIL

    • Ignition OFF.

    • Remove and inspect the engine oil level indicator for signs of coolant in the oil.

    Is coolant present in the engine oil? 

    Yes  If equipped with an engine oil cooler, GO to  B4If not equipped with an engine oil cooler, GO to  B5
    No  GO to  B6
  5. B4 CHECK THE ENGINE OIL COOLER

    • Inspect the engine oil cooler and seals for damage.

    Are the engine oil cooler and seals free of damage? 

    Yes  GO to  B5
    No  REPAIR as necessary.
  6. B5 CHECK THE ENGINE FRONT COVER

    • Remove the engine front cover. Refer to the engine front cover procedure for the engine being diagnosed. Refer to the appropriate Engine article for the procedure. Check the front cover seals for damage and signs of coolant passing in to the engine oil.

    Are the engine front cover seals or sealing surfaces damaged causing coolant to leak in to the engine oil? 

    Yes  Install new engine front cover seals or a new engine front cover. Refer to the engine front cover procedure for the engine being diagnosed. Refer to the appropriate Engine article for the procedure.
    No  GO to  B6
  7. B6 CHECK FOR COOLANT INTRUSION

    • Remove the spark plugs. Refer the Engine Ignition article for the engine being diagnosed. Refer to the appropriate Engine article for the procedure. Inspect the spark plugs for signs of coolant intrusion. REFER to: Spark Plug Inspection 

      Using a bore scope, inspect the cylinders and pistons for signs of coolant intrusion.

    Do the spark plugs or cylinders show signs of coolant intrusion? 

    Yes  GO to  B7
    No  GO to  B8
  8. B7 CHECK THE EXHAUST GAS RECIRCULATION (EGR) COOLING SYSTEM

    • NOTE: On engines equipped with an EGR cooling system, the hot exhaust gases are cooled by a cooler that uses coolant. It is possible for coolant to be lost to EGR system if the cooler is damaged.

      Inspect the EGR system for damage resulting in coolant intrusion. If necessary, REMOVE any EGR components for access to inspect the components for signs of coolant intrusion. Refer to the Engine Emission article for the engine being diagnosed.

    Is coolant leaking into the EGR system? 

    Yes  REPAIR as necessary.
    No  GO to  B8
  9. B8 CHECK COMPRESSION AND CYLINDER LEAKAGE

    • Ignition OFF.

    • Perform a compression test and cylinder leakage test. Check the test results for signs of a damaged head gasket or cylinder head sealing surfaces. Check the coolant for bubbles caused by air entering the cooling system from compression.

    Does the compression test or cylinder leakage test indicate a loss of compression or cylinder leakage in to the cooling system? 

    Yes  GO to  B9
    No  The conditions that are causing the loss of coolant are not present. Attempt to duplicate the conditions that cause the loss of coolant. Allow the engine to cool to ambient temperature or install the spark plugs and allow the engine to reach operating temperature. Recheck the compression and cylinder leakage. Check for other possible sources for coolant loss. REFER to the Diagnosis and Testing procedure in the Engine Cooling System article for the engine being diagnosed. Refer to the appropriate Engine article for the procedure.
  10. B9 CHECK THE ENGINE

    • Remove the cylinder heads. Refer to the cylinder head procedure(s) for the engine being diagnosed. Refer to the appropriate Engine article for the procedure. Inspect the head gasket(s) for signs of damage or failure. Inspect the cylinder block and cylinder head(s) for damage. REFER to: Cylinder Block Distortion . and REFER to: Cylinder Head Distortion .

    Are the cylinder head gasket(s), cylinder head(s) or cylinder block damaged? 

    Yes  REPAIR as necessary.
    No  Install a new long block.